SECTION 1:DESCRIPTION***********************************************************
KP3001B-7T 3th generation ionizing air nozzle is a fixed static elimination device developed and produced by Kapper to eliminate static electricity on the surface of objects. It can be used with compressed air and high-voltage power supply.
KP3001B-7T 3th generation ionizing air nozzle can generate a large amount of airflow with positive and negative charges, which is blown out by the compressed air at high speed, and can neutralize the charge on the object. When the surface of the object is negatively charged, it will attract the positive charge in the airflow. When the surface of the object is positively charged, it will attract the negative charge in the airflow, so that the static electricity on the surface of the object is neutralized and eliminated. The purpose of static electricity.
KP3001B-7T 3th generation ionizing air nozzle is widely used in coating, photoelectric, electronic production and packaging, printing, automation equipment and other industries.
SECTION 2:FEATURES***************************************************************
1.Neutralize static electricity quickly.
2.Ion air flow covers a large area.
3.Small size and portable operation.
4.The air nozzle can be equipped with a foot switch to control the compressed gas, which is available for customers to purchase.
5.The air gun has a good grounding protection function.
SECTION 3:SPECIFICATIONS********************************************************
| Operation coltage |
AC 4.6KV |
| Working distance |
150-300mm |
| Air supply connector |
Ф8mm(customized) |
| Ion balance |
≤|±50V|(distance 300mm) |
| Discharge time |
≤1S(distance 300mm) |
| Use medium |
Clean compressed air |
| Working temperature |
0ºC-50ºC |
| Working humidity |
<75% |
| Power cord length |
2.8M(customized) |
| Compressed air pressure |
0.3-0.8Mpa |
| Airflow velocity |
3-10m/S |
| Noise |
≤65dB |
| Ozone concentration |
≤ 0.03 ppm (distance 150mm) |
| Gross weight |
0.4kg(included 3M wire) |
| Power interface |
KP4001A/KP4004A |
SECTION 4:TEST RESULT**********************************************************
| Testing condition |
| Humidity:≤60% Testing voltage:1KV-100V Temperature:22ºC |
| Distance |
300mm |
| Decay time |
Positive |
1.0s |
| Negative |
1.0s |
| Offset voltage |
≤±50V |
* The test result by ME268A comprehensive electrostatic tester shall prevail.
* Test according to IEC - 61340-5-1 A 6.
* Test data may change with the surrounding temperature and humidity.
Spraying paiting industry:
Since most coatings use various flammable solvents as diluents, the static electricity generated during spraying is very easy to ignite and detonate the gases of these solvents during discharge. Therefore, how to prevent electrostatic hazards in paint spraying is a problem that cannot be ignored. In order to prevent the hazard of static electricity in paint spraying, the spray gun should be equipped with a device to eliminate static electricity; spraying workers are best to wear anti-static work shoes with a resistance of 10 to the 5th power of 10 to the 8th power of 10, and absolutely not to wear insulated working shoes; When a thin plate must be laid on the ground or the back of the coated object to prevent the paint from flying, insulating materials such as plastic plates must not be used, but thin plates made of conductive materials should be used.
12-1,2021 HOUHAI WISDOM VALLEY COMPLETED AND MOVED IN.
Audited Supplier 
){kind=link}
){kind=link}